|
Dual Readout Mode for Faster Data Transfer
Dual readout mode allows data to be read from the sensor
and transmitted twice as fast by using both CameraLink
channels. The image is read from the middle of the sensor
out toward the edges, resulting in improved image quality
when it is re-combined.
|
|
- Digital monochrome progressive scan CCD camera
- 1600 (h)x 1200 (v)7.4 µm square pixels
- 10 bit video output in Camera Link
- 17 full frames per second for single channel video
readout
- 30 frames per second with dual channel video readout
- Higher frame rates are possible with partial scanning
- User selectable partial scanning with one line intervals
- Edge pre-select and pulse width external trigger
modes
- Optimization of dynamic range by means of knee function
- Burst trigger for 5 different edge preselected exposures
in sequence
- Shutter speeds 1/30 to 1/14,000 in 10 steps or programmable
in 1H intervals
- Trigger and timing signals via CameraLink
- Short ASCII commands for fast mode setup via serial
port
- Functions controlled by RS232 Shutter, Trigger,
Scanning, Readout, RS 232C Trigger input, Set-up level
and Gain
- Operating temperature -5°C to +45°C
- Humidity 20 - 80% non-condensing
- Storage temp./humidity -25°C to +60°C/20%
to 90%
- Power 12V DC ± 10%. 6.6 W
- Lens mount C-mount
- Dimensions 40 x 50 x 120 mm (HxWxD)
- Weight 310 g
- Setup by Windows 98/2000/XP via RS232C or CameraLink
|