PC2-Vision Frame Grabber
       
coreco frame grabber PC2-Vision

 
The PC2-Vision from Coreco Imaging is the latest in the PC-Vision series of frame grabbers. The PC2-Vision acquires from standard and non-standard monochrome and RGB analog sources. It can digitize up to 3 synchronized monochrome cameras. Simultaneous acquisitions are supported through frame delay mode allowing concurrent captures from all six inputs and each of the six camera inputs has its own VS, HS, frame reset and WEN signals. The PC2-Vision's hardware scatter-gather engine requires minimal CPU involvement as it automatically retrieves each descriptor (from host memory) representing the non-contiguous host buffer. The Parallel I/O controller offers eight input, eight output, strobe input and output signals (to latch 8-bit data into onboard registers) and adedicated interrupt pin with programmable polarity.  
Notes       Features

Numerous Camera Inputs
• Acquisition from up to 6 monochrome cameras, 2 RGB
cameras or 2 dual-channel analog cameras
• Supports frame delay mode cameras for up to 6 simultaneous images capture

Trigger to Image Reliability
• PC2-Vision embedded controller ensures images are
transferred into host memory whenever a trigger is received

Flexible Camera Interface
• Each camera has its own vertical sync., horizontal sync.
and frame reset input for maximum flexibility when
building the machine vision system

High Performance Acquisition
• 40MHz digitization rate supports standard or custom
progressive scan asynchronous reset cameras

  
  • Supports up to 6 monochrome or 2 RGB analog cameras
  • Dual-channel camera support
  • Simultaneous acquisition from up to 3 synchronous monochrome or 1 RGB cameras
  • Supports standard RS-170 and CCIR formats and non-standard formats
  • Acquisition from interlaced and progressive scan cameras
  • Partial scan mode
  • On-board hardware scatter-gather engine
  • 40MHz digitization rates at 8-bit
  • Supports asynchronous reset with pulses up to 60s in duration
  • Each camera has its own vertical sync., horizontal sync., frame reset and WEN signals
  • Two pixel clock inputs
  • 8MB onboard memory
  • 8-bit monochrome, 32-bit RGB, 16-bit YUV with neutral chrominance
  • PCI Transfer Up to 100MB/s sustained
  • RS-232 serial port available on each MDR-36 connector