The
PP800 lighting controller from Gardaspft Vision is intended
to be used with the new generation of high intensity, 'LumiLEDs'.
It provides highly stable timing and intensity regulation when
used with these high intensity illumination products.
Three modes of operation are provided independantly for each
of the 4 channels.
Continuous:
Pulsed:
Selected:
Output
is a continuous current
Output is pulsed once per trigger
Output changes according to digital input.
Features
Specifications
Two
Channel, 4A LED PSU
Easy Push-Button Set Up
Non-Volatile Standalone Operation
Strobed/Continuous Output
Optional RS232 Control
System Functions
Channels:
4
independant constant current
Output
Current:
From
0.1A to 30A in steps of 0.1A. Up to 4A per channel continuous
or 10A pulsed
Trigger
Inputs
4
Digital inputs: options for opto-isolated, TTL or RS422
Slew
Rate:
15A
per microsecond per channel
Pulse
Width Timing:
From
1 microsecond to 10 milliseconds in steps of 100 nanoseconds.
Timing repeatability 100 nanoseconds
Delay
from Trigger to Pulse:
From
5 microsecond to 10 milliseconds in steps of 100 nanoseconds.
Timing repeatability 100 nanoseconds
Output
Voltage:
0V
- 40V
Supply
Voltage:
Unregulated
or regulated 12V to 45V. The supply voltage must be at least
1V higher than the output voltage required by the lighting.
